Launch CRT5011E TPMS activation & diagnostic tool is specially developed by LAUNCH, which enables users to trigger TPMS sensor, program TPMS sensor, perform the relearning procedure and check sensor part number. Additionally, it also supports all 10 modes of OBD II test for a complete diagnosis.
With built-in help menus and code definitions, diagnosing and repairing that dreaded Check Engine Light is now easier than ever!
This tool provides the following functions:
1. TPMS:
Activate and match with all 315 MHz / 433 MHz tire pressure sensors
Reset, relearn and reprogram tire pressure sensors fast
Diagnose the tire pressure issues, read and clear tire pressure DTCs
Reprogramming LAUNCH LTR01 sensors AND other Unencrypted sensors with unlimited times
Read tire pressure, tire temperature and battery status accurately
Reprogram up to 8 sensors at one time
Provide TPMS relearning procedures and sensor OE number lookup
Multiple ID generation methods: Automatic creation/Manual creation/Copy ID by Activation/Copy by OBD/Creat Multi-sensor (1-8)
2. Full OBD diagnosis: Read dynamic data streams and MIL/Read readiness status/Freeze frame data/Read DTCs/Clear DTCs/O2 sensor test/On-board monitor test/Read vehicle information
Note: For indirect TPMS vehicle, only the Relearning function is supported.For vehicle using Direct TPMS, it generally includes: Activation, Programming andRelearning. The available TPMS functions may vary for different vehicles being serviced.
The Launch CRT5011E TPMS sensor programmer tool can program all Launch LTR01 sensors and Other Unencrypted Sensors, including 315MHz and 433MHz, to replace damaged sensors.
CRT5011E has 5 modes to program Launch LTR01 Sensors and Other Unencrypted Sensors:
Auto Create: This function is designed to program the LAUNCH-sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. Select the wheel which needs to be programmed on the tool, place a LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE SENSOR to create a new random sensor ID.
Manual Create: This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available.
Copy ID by activation: This function allows users to write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered.
Copy by OBD: Firstly, you need to perform a Read ID from Vehicle in the Relearn function, which reads the sensor ID from the vehicle ECU.
Creat Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time.
TPMS Sensor Activate:
Launch CRT5011E TPMS Diagnostic Tool allows users to activate TPMS sensor to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature and battery condition.
TPMS Diagnose：
The latest CRT5011E TPMS reset tool can diagnose the TPMS system to read and clear TPMS DTC, read ECU sensor ID, check sensor ID and ECU ID. Turn off the TPMS Warning light is quickly and easily.
|
|
|
|---|---|---|
Full OBDII 10 ModesThis option presents a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emission-related. | Live Data StreamThis option retrieves and displays live data and parameters from the vehicle’s ECU. You can view up to four different kinds of data at the same time. | TPMS ServiceThis function includes two modules: Relearn Procedure and Part Number Lookup. Relearn Procedure: Relearn operation applies only when the newly programmed sensor IDs are different from the original sensor IDs stored in the vehicle’s ECU. Relearn is used to write the newly programmed sensor IDs into the vehicle’s ECU for sensor recognition. Part number lookup: It allows you to check the OE number of the sensors. |
